Welcome, Guest. Please login or register.
August 22, 2014, 09:38:00 PM
Home Help Search Login Register
News: Welcome to CISinks.com forum!
Continuous Ink System       Refillable Cartridge       Bulk Refill Ink       For EPSON       For HP       For Canon       For Brother      
+  CISinks.com Forum for Continuous ink system, refillable ink cartridges and bulk refill ink for EPSON, HP, Canon and Brother Inkjet printers
|-+  Troubleshooting and Installation Instructions
| |-+  Hewlett-Packard Printers
| | |-+  HP CISS Installation Videos
« previous next »
Pages: [1] Print
Author Topic: HP CISS Installation Videos  (Read 4426 times)

cisinks
Administrator
Hero Member
*****
Posts: 289


« on: June 25, 2010, 05:53:07 PM »

These videos are intended as general guidelines.  Your main goal of installing any CIS system is to make sure that your ink lines are not too long, which can cause it to 'whip around', or too short, which will 'tug' on the ink lines and might cause either recognition issues or break the ink lines.

ALWAYS keep your ink tank reservoirs on the same surface as your printer when installing your CIS system!  If not, ink can leak into your printer.  ALWAYS use your best judgment when installing your system.  ALWAYS contact us if you have any questions PRIOR to installing your system.  You can reach us at sales@cisinks.com.

All videos are grouped by similar set-up procedure, arranged in alphabetical order and the property of their respective owners:

All HP printers that use a HP02 cartridge:
<a href="http://www.youtube.com/watch?v=yD0QqOsspIw" target="_blank">http://www.youtube.com/watch?v=yD0QqOsspIw</a>

HP8000/HP8500 CISS Installation:
<a href="http://www.youtube.com/watch?v=GgFNFRwt7oM" target="_blank">http://www.youtube.com/watch?v=GgFNFRwt7oM</a>

HP10/11 Cartridge  >>>  http://www.youtube.com/watch?v=59574mGHIfc  >>>  NOTE!!  No need to prime system with needle.

HP88 Cartridge  >>>  http://www.youtube.com/watch?v=CUqGW-NKxyU&feature=related
« Last Edit: January 26, 2011, 03:03:50 PM by cisinks » Logged

Continuous Ink System    Refillable Cartridge    Bulk Refill Ink    For EPSON    For HP    For Canon    For Brother   
Mfs
New Member
*
Posts: 1


« Reply #1 on: July 01, 2010, 09:53:24 AM »

I print a small neighborhood add paper and wanted to increase my circulation but the cost was to prohibitive, It's over $100.00 for 4 replacement ink cartridges for the Hp officejet pro 8000. I did some research on bulk ink systems and found CISinks. I watched the videos and bought the system. It was a worth while investment. Now I have two printers and will soon buy another system. You do have to transfer the chip set from the old cartridges and I damaged one in the proses so I had to buy another HP ink cartridge. Once I did that it was easy street from there. So far I have printed 6000 legal size pages ( 8.5 x 14 ) and it looks like I will be able to print another 2000 or 3000 pages before I have to bye some more bulk ink. At $85.00 for the bulk ink on sale its a steel. No place can I have that much printed up for that price. Thanks CISinks.   Daniel
Logged
cisinks
Administrator
Hero Member
*****
Posts: 289


« Reply #2 on: September 14, 2010, 07:47:53 PM »

Thanks for the feedback MFS!  Our ultimate goal here is to save our customer money on their prints while providing the best service as possible.   Cheesy
Logged
speedmaster
New Member
*
Posts: 2


« Reply #3 on: March 05, 2011, 02:06:54 PM »

Just bough a continuous ink system for the 6500 and trying to install it. The same instruction above will be ok minus the cartridges that are different? Is there any type of priming needed for the cartridge or the ink will begin to flow as soon as it is hooked up and started?

Id there is someone checking this forum right now I would appreciate a fast reply so that I can finish this today yet.

Thank you guys

Speed
Logged
cisinks
Administrator
Hero Member
*****
Posts: 289


« Reply #4 on: March 08, 2011, 04:37:09 PM »

You would need to prime the cartridges if there is a lot of air in the lines.  Follow this method to prime your HP6500, which uses a 'sponge-type' cartridge.  Other than that, the installation should be just like in the video.  Just be careful to NOT DAMAGE THE ORIGINAL HP CHIPS when you take them off and install it onto the CISS.  We have found that using double-sided tape works better than superglue.   

http://www.youtube.com/watch?v=fg2lk4lou2Q&feature=mfu_in_order&list=UL

If you need help, don't try to do anything yourself and send us your phone number to sales@cisinks.com and we'll give you a call back to assist you with your installation.  Hope this helps!

Logged
Pages: [1] Print 
« previous next »
Jump to:  


Login with username, password and session length

Powered by SMF 1.1.16 | SMF © 2011, Simple Machines