Our line of high quality ABS 3D filaments, made from virgin grade (raw white pellets). Manufactured & thoroughly tested under strict guidelines to give the best results possible. Along with a loose temperature range to give you smooth prints which require less calibration and give off fewer extruder issues. Compatible with most 3D printers currently out on the market. Net Weight:1.00kg / 2.2lb Package Size: 16 x 16 x 9cm INCLUDES: 1x 3D Filament roll with spool Diameter | 1.75mm / 3.00mm (+ / - 0.01 mm tolerance) | | | Compatible 3D printer | MarkerBot, Afina, UP!, RepRap, Ultimaker, IdeaWerk, X-Master Solidoodle & etc | Weight of Filament | 0.75kg and 1kg | | | Degradable | No | Storage Environment | cool place, avoid direct sunlight, rain, sharp temperature differences | Density | 1.03g / cm³ | Melt Point | No obvious Melt Point | Recommended Print Temperature | 210 - 250°C | Tensile Yield | 37Mpa | Flexural Strength | 620Kg/cm³(ASTM D-790) | Flexural Modulus | 2060Mpa | Impact Strength | 40KJ / ㎡ | Thermal Distortion Temperature | 97°C | Relative Density | 1.03g/cm³ | Water Absorption | 0.2 - 0.3% | Oxygen Index | 18 - 20 | Molding Shrinkage | 0.4 - 0.6% |
|