|
Our line of high quality PLA 3D filaments, made from virgin grade (raw white pellets). Manufactured & thoroughly tested under strict guidelines to give the best results possible. Along with a loose temperature range to give you smooth prints which require less calibration and give off fewer extruder issues. Compatible with most 3D printers currently out on the market. Net Weight: 3.0lb Package Size: 16 x 16 x 9cm INCLUDES: 1x 3D Filament roll with spool | Diameter | 1.75mm / 3.00mm (+ / - 0.05 mm tolerance | | | | | Compatible 3D printer | MarkerBot, Afina, UP!, RepRap, Ultimaker, IdeaWerk, X-Master Solidoodle & etc | | Weight of Filament | 3.0lb | | | |
| Degradable | Yes | | Storage Environment | Temperature: < 50°C, Humidity: < 80% | | Density | 1.25g/cm³ | | Recommended Print Temperature | 210 - 250 ° C | | Tensile Yield | 55Mpa (GB/T1040-1992) | | Flexural Strength | 1355Kg/cm³ | | Flexural Modulus | 4500Mpa | | Impact Strength | 3KJ / ㎡ | | Thermal Distortion Temperature | 58°C | | Relative Density | 1.25g/cm³ | | Water Absorption | 0.5% | | Oxygen Index | 25 | | Molding Shrinkage | 0.3% |
|
